XMINNOV
RFID bolt seal can provide clearance service quickly.
RFID bolt lock seal can't be copied. Every RFID Seal tag has unique ID from the world.
The security bolt seal also enables offline tamper verification.
RFID container bolt seal can provide more security. Use only once.
Monitoring system can integrate whole transport when truck or container has bolt RFID seal tag installed.
Using passive RFID bolt e seal will provide low cost and high level security service.
Confirms to ISO 17712 : 2013 3 (H)
Air interface Protocol: ISO/IE EC 18000-6C, EPC Class 1 Gen
Chip : Alien Higgs 3/Higgs 4 (customized chip were supported)
Unique TID : 96 bit
EPC : 96 bit
User Memory : 512 bits
Data retention : 50 years
Write endurance : 100,000 cycles
Read Range : Up to 10 meter
Operating Frequency: 860-960MHz
Operating Mode: Passive (Battery-less transponder)
Ingress Protection: IP65
Operating Temperature: -30?C to +80?C
Storage Temperature: -30?C to +80?C
Pin /Key: Length:76mm±2mm
Weight:335g±20g
Material:Carbon steel galvanization + ABS
Body/Locker: Length:68mm±2mm
Weight:228g±20g
Material:Carbon steel galvanization + PC + ABS
RFID Bolt Seals are designed as a one-time use product which means once the seal has been locked it must be removed by destroying the seal. Each Seal has a unique identification number (TID) and provision for additional customized EPC data to be stored.Thus any tampering of the seal becomes immediately apparent, as either the seal is missing, or if a new seal has been fitted, responds with an incorrect number.
The use of UHF RFID technology enables security bolt seal reading via an appropriate reader installed (eg. when a container is passing a check point and can be used for a various security seal applications such as regular containers, railroad cars, metallic pallets etc.
$1.6
$0.09
$1.6
$0.5
$0.9
$0.42
$0.9
$1.5
